Sample ID plate marking
- ID plate marking sample
ID plate marking station TM 100
- TM 100 (here with device 5/10)
Load - mark automatically - eject - done
The PinMark™ TM 100 was developed straight out of customer demand. Through Modular design it is easily and fast adjusted to your needs and simple to use.
Convincing arguments
- Compact design
- Simple operation
- Fast and easy adjustment to different sizes of ID plates
- Large capacity plate storage
- Modular design allows for different Marking systems
- Flexible
Continuous marking, in full or semi-automatic mode, is assured due to the lightweight yet mechanically robust construction of the TM 100.
Mode of Operation
The storage rack is first stocked manually. After pressing the START button - in Automatic mode - the ID-plate blanks are move from the Storage to the Marking unit on the transport slide. Here they are fixed, marked and then ejected.
An optional Stacker (working on the FIFO principle) would be the logical addition here. The Systems operates self-controlled until either the storage unit is empty or a preset number of ID plates was marked. For a trouble free operation the ID plate blanks should be de-burred.
Technical Data: TM 100 | |
D x B x H | 600 x 580 x 300 mm |
Weight | 24 Kg (including PinMark 5/10 and Z-Axis) |
Load size | 300 mm |
Cycle time | depending on marking parameters |
ID-plate size | Min. 32 x 30 mm / max. 100 x 100 mm |
Size adjustment | stepless |
Optional | stacking mode |
Power supply | 100-230 V / 50/60 Hz |
Compressed air | max.6 bar, 6 mm |
