Control systems

Dot Marking (Dot Peening) / Scriber- control system UMC 112

The UMC 112 control system serves to control all Dot Peening Markers (Needle Embossers) and Scribers of the PinMark series.

This control system sends all marking data to the marking head. This marking data contains, for example:

  • 2D codes (DataMatrix)
  • Serial numbers
  • Company logos and other graphics
  • All other conceivable product data

Modifiable data, such as date, time, batch number, material composition, etc. is automatically generated by the Ostling Dot Marking control system according to previously established criteria.

Various interfaces make it possible to send the corresponding information to the control-system in advance. By using a barcode scanner, for example, employee and extensive material information can be scanned in and later embossed onto the product as a compact 2D code (this is merely one of many examples).

The UMC 112 can control up to two Dot marking heads simultaneously. Besides the marking data, the positions of the Dot marking heads are also adapted to the product via the control. This means that, in addition to moving the needle in the X and Y direction, additional rotation axes, automatic vertical axes (Z-axes), indexing tables, type plate magazines, etc. can also be activated.

Four advantages result using the Embedded Linux operating system

  • Microsoft Windows licensing costs do not apply
  • User-friendly Windows user interface
  • Special solutions for special requirements are easier to realise
  • Stability in industrial routine
control system
Control UMC 112
Technical data: UMC 112 control system (shortform)
CPU 500 MHz, 512 MB RAM, USB 2.0, Ethernet, SVGA
Operating system Embedded Linux
Memory Compact Flash 512 MB, optional HD
Motor control 2 axes, optional 4 axes
Output 8 digital, 24V = / optional 32 outputs
Input 8 digital, 24V = / optional 32 inputs
Display SVGA 800 x 600 Pixel
BxDxH 443 x 352 x 183 mm
Keyboard Integrated keypad or external keyboard
Interfaces USB: Keyboard, Memorystick, Mouse
Ethernet: SMB, control protocol
RS232 / RS485: Control protocol, 24V I / O: Start, E-stop, file selection / Profibus DP

Control System UMC box for Dot Marking (Needle Ebossing) / Scribing

The Dot marking control UMC box is basically a UMC eco without own intelligence on board. It has the same engine control map, such as the UMC eco.

The UMC box was not a skimp on the quality. This Dot Peening device is manufactured by us in Germany at the usual high level quality.

control system
Control UMC box
Technical data: UMC box control system (shortform)
Computer external PC / not included
Minimum requirement Embedded Linux
Motor control control for 2 axes 2-phase stepper motors
Outputs 8 digital, 24V =
Inputs 8 digital, 24V =
Software Pinware 4 for Windows
Display SVGA 800 x 600 Pixel
BxDxH 310 x 176 x 75 mm
Keyboard Integrated membrane keyboard or external keyboard
Interfaces RS232 / RS485: Control protocol, 24V I / O: Start, E-Stop

The UMC eco control system is used to control all our Dot Marking devices, embossers and scribers the PinMark – series.

  • 2D codes (DataMatrix)
  • serial numbers
  • Corporate logos and other graphics
  • All other kinds of product data

Various communication interfaces make it possible to send the information to the controller. Variable data such as date, time, batch number, material composition, etc. are generated automatically by the control according to predefined criteria. In addition, it is possible using the integrated scripting interface to manipulate input data.

control system
Control UMC eco
Technical data: UMC eco control system (shortform)
Computer ÖSTLING PC control, 400 MHz, 128 MB RAM, serial interface, USB, Ethernet
Memory Compact Flash 256 MB, optional HD
Motor control 2 axis motor control for bipolar control of 2-phase stepper motors
Outputs 8 digital outputs for standard signals, optically isolated, 24 V Total current on built-in power supply max. 0.5 A
Inputs 8 digital inputs for standard signals, galvanically isolated
Software Pinware 4 for Windows
Display TFT color display (640 x 480 pixels)
BxDxH 310 x 300 x 170 mm (ohne Handgriff, Stecker und Kabel)
Keyboard Compact, integrated keypad or external PC keyboard
Weight Ca. 8.5 kg

Direct access to the controls and our needle embossers in the online shop right here.

Contact us!
+49-212-2696-0
+49-212-2696-199
Latest Product News
sidebar-temp2

AIO - The most compact "All In One" laser