Needle systems

image_pdfimage_print

Needle systems for the Ostling Dot peening (Needle embossing) machines.

Materials which are marked by using a carbide tipped tool (needle) that oscillates through compressed air application and moves in an X and Y direction during its upward and downward movements is called Dot Peening. Our Needle systems have the usual high Ostling Quality Made in Germany.

This results in a dense sequence of individual dots (writing) being punched into the material. The result is a precise, clean marking result consisting of a fine continuous line – at a low noise operation.

In addition to the silent operation and the finer typeface needle Dot Peen Systems can be converted without any problems in Needle Scribers if needed. Only the needle system (accessory) must be replaced. The right needle depends on the different materials and the marking system. Our needle systems are all of highest quality and very durable.

Please have a look at our needle systems in our online shop.
Please contact our service department if you have any questions about our needle systems and/or are not sure which needle suits best.

Below is an overview of the needle systems which we offer.

1354

Description

Marking Needle System WE2

Working Pressure:   2 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 14 mm
Maximum Stroke: 4 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: all, except 3/5 + MagicPin H

1362

Description

Marking Needle System WE2 (Ø4)

Working Pressure:   2 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 14 mm
Maximum Stroke: 4 mm
Needle Diameter: 4 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: all, except 3/5 + MagicPin H

1365

Description

Marking Needle System WE2 long

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 14 mm
Maximum Stroke: 3 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Needle Length: 128 mm
Marking Head: all, except 3/5 + MagicPin H

1367

Description

Marking Needle System WE3

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1
Piston Diameter: 14 mm
Maximum Stroke: 4 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: 3/5 + MagicPin H

1369

Description

Marking Needle System WE3 long

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1
Piston Diameter: 14 mm
Maximum Stroke: 4 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Needle Length: 128 mm
Marking Head: 3/5 + MagicPin H

1373

Description

Marking Needle System WP2 (84mm, Ø4mm)

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 10 mm
Maximum Stroke: 4 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: all, except 3/5 + MagicPin H

1378

Description

Marking Needle System WP2 (84 mm)

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 10 mm
Maximum Stroke: 8 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: all, except 3/5 + MagicPin H

1379

Description

Marking Needle System WP3

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1
Piston Diameter: 10 mm
Maximum Stroke: 8 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: 3/5

1381

Description

Marking Needle System WE1R

Working Pressure:   1 – 4 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 16 mm or 20 mm
Maximum Stroke: 10 mm
Needle Diameter: 3 mm
Needle Tip Angle: 60°, 90° or 120° (carbide or diamond insert)
Marking Head: All scribers

1384

Description

Deep-Marking Needle System WE1

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 12 mm
Maximum Stroke: 5 mm
Needle Diameter: 4 mm
Needle Tip Angle: 60°, 90° or 120°
Marking Head: all, except 3/5

1386

Description

Deep-Marking Needle System WE4

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 12 mm or 16 mm
Maximum Stroke: 4 mm
Needle Diameter: 5 mm
Needle Tip Angle: 90° or 110°
Marking Head: Up from 8/14

1386

Description

Deep-Marking Needle System WE4 Steel

Working Pressure:   4 – 6 bar
Air: filtered
Screw Thread: M16 x 1.5
Piston Diameter: 12 mm or 16 mm
Maximum Stroke: 4 mm
Needle Diameter: 5 mm
Needle Tip Angle: 90° or 110°
Marking Head: Up from 8/14


Contact us!
+49-212-2696-0
+49-212-2696-199
Latest Product News
sidebar-temp2

AIO - The most compact "All In One" laser